At Step 5 leave the default WEP: Disabled radio button selection as-is and
click Next. This will take you to the Setup Complete page.
When the Setup Complete page appears, click Save. This will re-start the
gaming adapter. Wait a minute or two then refresh your browser.
6.
7.
8.
Figure 20-5
The beginning of the
D-Link Gaming Adapter
configuration sequence
140 Project 20
After the gaming adapter has restarted, select the Wireless tab at the top of
the page, then click Wireless Security on the left menu.
On the Wireless Security page, shown in Figure 20-8, choose WPA-Personal
for the security mode, choose TKIP from the Cipher Type drop-down list, and
type the security key used by your wireless access point in the Pre-Shared
Key field.
Click Save Settings in Figure 20-8. You??™re just a couple of steps away from a complete
wireless bridge.
9.
10.
Figure 20-6
Use the default wireless
setting of Infrastructure
mode for the gaming
adapter.
Bridging a Gap, Wirelessly 141
Step 2: Configure the Bridge
to Be Part of Your Network
This step is a one-way street??”after you complete it, the bridge and the computer
connected to it become part of your existing network, and you will no longer be able
to access the configuration web pages or change the settings of the bridge without
resetting it.
In the LAN settings page of the bridge configuration, shown in Figure 20-9, select
Enable DHCP and then click the Save Settings button.
Pages:
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125