Writers on drainage, almost without exception, recommend the use of
elaborate sets of tools which are intended for cutting very narrow
ditches,--only wide enough at the bottom to admit the tile, and not
allowing the workmen to stand in the bottom of the ditch. A set of these
tools is shown in Fig. 22.
Possibly there may be soils in which these implements, in the hands of men
skilled in their use, could be employed with economy, but they are very
rare, and it is not believed to be possible, under any circumstances, to
regulate the bottom of the ditch so accurately as is advisable, unless the
workman can stand directly upon it, cutting it more smoothly than he could
if the point of his tool were a foot or more below the level on which he
stands.
On this subject, Mr. J. Bailey Denton, one of the first draining engineers
of Great Britain, in a letter to Judge French, says:
"As to tools, it is the same with them as it is with the art of draining
itself,--too much rule and too much drawing upon paper; all very right to
begin with, but very prejudicial to progress. I employ, as engineer to the
General Land Drainage Company, and on my private account, during the
drainage season, as many as 2,000 men, and it is an actual fact, that not
one of them uses the set of tools figured in print. I have frequently
purchased a number of sets of the Birmingham tools, and sent them down on
extensive works. The laborers would purchase a few of the smaller tools,
such as Nos.
Pages:
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142